Werner Electric Private Limited

Highlights:

• Contacts: DPDT / 4PDT
• Built in options include LED,  Check Button, Latch Button, Mechanical Flag Indicator
• Current Rating: 10A @ 220VAC for DPDT and 6A @ 220VAC for 4PDT relays
• No soldering inside the relays. All are welded spots.
• Standard foot print, hence can be used on any socket
• Sockets range include IP 20 finger protection type and PCB terminals

Highlights:

• Bright SMD LED’s Indications.
• 10A Relay Contacts.
• Brass cage Terminal blocks.
• Thick End-plates for rigidity and longer life.
• More than 200 type of interface modules available.

Highlights:

• Available in SPDT and DPDT.
• Maximum function minimum space design.
• Suitable for 50 Hz and 60 Hz frequency cycles.
• Available in 6, 12, 24, 110, 220 & 240V AC and DC.
• Built in Diode models with contact capacity of 10 Amperes.

Highlights:

• Style: 5-pin, snap/surface mount
• Solder tab terminals
• Rated Current: 12A
• Rated Voltage: 250V AC/DC
• Dielectric Strength: b/w coil & contact 5000V, 1 minute b/w terminals of the same pole: 1000V, 1 minute

Highlights:

• With Fuse.
• 10A Relay Contacts.
• Brass cage Terminal blocks.
• Thick End-plates for rigidity and longer life.
• More than 200 type of interface modules available.

Highlights:

• All Relays are fully sealed type.
• Contact capacity is 6 Amps@230VAC
• Available standard voltage ratings from 6 to 48V AC/DC.
• Designed for direct PC or panel mount via 74 Series sockets.
• Featuring only 5 mm width with both relay and socket put together
• More than 100,000 operational life

Highlights:

• Dielectric strength
• Available as SPDT, DPDT, SPST-NO & DPST-NO.
• Available in 8 Amps and 12 Amps contact capacity.
• Compact and small with only 16 millimeters height.
• Standard voltage ratings 6V to 240V AC & 6V to 110V DC.
• Can be directly mounted on PC Board, PCB socket or Panel mountable socket

Highlights:

• Sockets with built in diodes.
• Sockets dielectric strength 2000V.
• Sockets with 10 amps contact ratings.
• Options from single pole up to four poles.
• Suitable for Din rail and PC board mounting.
• Sockets with screw type & plug in type termination.
• Werner sockets can accommodate all makes of relays.

Highlights:

• Style: 8-pin, snap/surface mount
• Solder tab terminals
• Rated Current: 8A
• Rated Voltage: 250V AC/DC
• Dielectric Strength: b/w coil & contact 5000V, 1 minute b/w terminals of the same pole: 1000V, 1 minute

Highlights:

• 30A Switching Capability
• 4.5KV Dielectric strength
• Class F Insulation available
• Open type and sealed type available
• Environmental friendly(RoHS complaint)
• Outline Dimentions (32.4 x 27.5 x 20)mm
• Current Rating: 30A 240VAC for 1A, 20A 240VAC for 1B, 30A 240VAC for 1C(NO), 20A 240VAC for 1C(NC)

Highlights:

• Solid state relays of fully sealed type
• Ranging from 2 Amps to 100 Amperes
• Available in both AC and DC control voltages
• Suitable for 50 Hz and 60 Hz frequency cycles
• Operation indicator enables monitoring operation
• Built-in snubber circuit for external surges with high efficiency.
• Unique heat sink to save space and maximum heat dissipation

Highlights:

• Available in DPDT and 3PDT
• Suitable for 50 Hz and 60 Hz frequency cycles
• Coil status and contact status indication built in
• Available in 6, 12, 24, 110, 220 & 240V AC and DC
• Suitable for Heavy duty or even vibrating environments
• Can take up to 10 Ampere Continuous Load Current
• Fixed contacts powered by WERNER AFT (Anti-Fuse-Technology)